1. Download Iview Communication Drivers
2. Download Iview Communication Driver Software
3. Download Iview Communication Driver Windows 7

With over 25 years' experience in data acquisition from different sources, and hundreds of drivers to choose from, PcVue Solutions data acquisition layer (called also CIMWAY®) is the foundation of our real-time data infrastructure.
CIMWAY® offers a large range of scalable driver solutions for collecting data from automation devices. Communication is managed through a robust platform that supports a collection of standards drivers for Schneider Electric, Siemens, Rockwell, Mitsubishi, Wago,…. A driver development kit is also available for our customers to develop their own driver and obviously driver development is ongoing and new drivers are added continuously by our R&D team.

Download ASUS X543MA Atheros Bluetooth Driver 10.0.3.22 for Windows 10 64-bit (Bluetooth). It is highly recommended to always use the most recent driver version available. Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched. Hello acer technician, a person is asking drivers for 'pci simple communications controller'. Place that driver to your support site, without having to search for an obscure third-party sites.

Depending on the version of PcVue compatibilitiy and prerequisites may change. Please check documentations (release notes, readme) available on the KB.

INTERFACE		DRIVER VERSION
S - Serial port E - Ethernet port Mb - Manufacturer board N/S - Not Significant	Mo - Molex O - OPC Server H - Hilscher adapter	Native - Integrated in PcVue Act - Activated on order

Manufacturer	Protocol/Equipment	Interface	Requirement	Version
ABB	SPA-BUS	S	Native
ALSTOM	ESP GEM 80	S	Native
ALSTOM	ESP Gemlan-T TCP/IP	E	Native
ALSTOM	Ethernet SRTP	Mo	PCU2000ETH
ALSTOM	Ethernet SRTP for C80-75 & C80-35	O	SW1000ETH
ALSTOM	Ethernet SRTP for C80-75 & C80-35 Time stamped	E	Native
ALSTOM	Nbus ASCII / RTU	Mo	PCI1000/2000/4000 PCU1000
ALSTOM	SNP-X	Mo	PCI1000/2000/4000 PCU1000
ALSTOM	SNP-X for C80-75 & C80-35	O	SW1000SER
ALSTOM	Time stamped Nbus	O	SW1000SER
BACnet - ASHRAE	BACnet/IP client - BTL certified Profile B-AWS	E	Native - Act
BACnet - ASHRAE	BACnet/IP server - Profile B-ASC	E
BECKHOFF	TwinCat over TCP/IP	E	TwinCat ADS	Native
CERBERUS	CERLOOP	Mo	PCI1000/2000/4000 PCU1000
CITILOG	IP-Citilog	E	Native
COMMEND SA	Commend OPC Server	O
COMMEND SA	ICX	E	Native - Act
CROUZET	CBUS	S	Native
DNP USER GROUP	DNP3 Master station	E	Native - Act
ECHELON	LON	Mb	LCA Object Server	Native
ECHELON	LON	E	NL220, LonMaker	Native
EIB	OPC EIB	O	EIBA Server
ELSAG BAILEY	Data Link	Mo	PCI1000/2000/4000 PCU1000
EMERSON	DeltaV (DCS)	O	DeltaV OPC Server
FISHER	ROC protocol for Roc 300 Series, FloBoss 407 & 500 Series	S	Native
GE FANUC	Ethernet SRTP	Mo	PCU2000ETH
GE FANUC	Ethernet SRTP for 90-70 & 90-30 Series Time stamped	E	Native
GE FANUC	SNP-X	Mo	PCI1000/2000/4000 PCU1000
GE FANUC	SNP-X for 90-70 & 90-30	O	SW1000SER or KEPServer
Generic	SQL driver	E	Native - Act
Generic GPS protocol	Standard NMEA supported (GPPPA,GPGLL,GPGSA,GPGSV,GPRMC,GPVTG)	S	Native
HILSCHER	MPI for Siemens S7-300 & S7-400 via Ethernet	H	Netlink Adapter for MPI	Native - Act
HITACHI	EX8000 - MLC 8000 system	E	NB : Ethernet TCP/IP Client & UDP Server	Native
HONEYWELL	HC9000 Ethernet	O	KEPServer
HONEYWELL	PLANTSCAPE/EXPERION (DCS)	O	Experion OPC Server	Native
HONEYWELL	UDC Ethernet	O	KEPServer
HONEYWELL	UDC Serial	O	KEPServer
IEC	IEC 60870-5-104 Master	E	Native - Act
IEC	IEC 60870-5-104 Outstation	E	Native - Act
IEC	IEC 61850 Client - DNV-GL certified	E	Native - Act
JOHNSON CONTROLS	N2OPEN (Optomux)	O	NT9100 OPC Server
JOHNSON CONTROLS	Optomux N2 for DX9100 & DC9100	S	DX & DC Series	Native
JUMO	JUMO_ASCII	S	Native
JUMO	JUMO_JBUS	S	Native
KEPWARE	All supported protocols	O	For the complete list of supported protocols visit www.kepware.com
KERLINK	LoRa	E	Native - Act
KNX	E	Native - Act
KROHNE	BM100 BUS	S	Native
KROHNE	BM100 PTP	S	Native
LANDIS&GYR	NRU/NRK	S	Nirmo gateway	Native
LEGRAND / BTICINO	OpenSCS	E	Native
LSIS	IP-XGT	E
MATRIX	PUP	S	Native
MATSUSHITA	Mewtocol	S	Native
MATSUSHITA	Mewtocol IP	E	Native
MICROSOFT	DDE client	N/S	Native
MITSUBISHI	FX 485	S	Native
MITSUBISHI	FX-Series	S	Native
MITSUBISHI	Melsec A-Series	S	Native
MITSUBISHI	Melsec TCP/IP for A and Q Series	E	Native
MTT	ME1000	E	RioTcplib.dll Librairy - Please contact MTT
MOELLER	SucomA	Mo	PCI1000/2000/4000 PCU1000
MOELLER	SucomA	O	SW1000SER or KEPServer
MOLEX	All supported protocols	O	For the complete list of supported protocols visit www.molex.com (Network Interface Card)
MOXA	Moxa ioLogik - Support controllers in the E1200 & E2500 series	E	Native
MQTT	MQTT - Publisher	E	Native - Act
MQTT	MQTT - Subscriber	E	Native - Act
MULTITECH	LoRa	E	Native - Act
NAPAQ	XFLOW (RIO), TBC	O	DevIO OPC Server
NATIONAL INSTRUMENT	Optomux for FieldPoint and Compact FieldPoint	O	OPC FIELD POINT SERVER
ODVA	CIP	O	SW1000ETH or KEPServer
OMRON	All OMRON protocols	O	CX Server OPC or KEPServer
OMRON	FINS TCP	Mo	PCU2000ETH
OMRON	FINS TCP for OMRON C, CV and CS series	O	SW1000ETH
OMRON	SYSMAC-WAY	S	Native
OMRON	SYSMAC-WAY	Mo	PCI1000/2000/4000
OPC Foundation	OPC-UA DA Server	N/S	Native - Act
OPC Foundation	OPC-UA DA Client	N/S	Native - Act
OPC Foundation	OPC-DA client	N/S	Native
OPC Foundation	OPC-DA Server	N/S	Native
OPC Foundation	OPC-XML DA client	N/S	Native
OPTO22	Optomux	S	Johnson Controls DX 9100	Native
PERAX	P200,P400,P16	O	DevIO
PERAX	Perax time stamped	S	ARLEQUIN Concentrator	Native
PHOENIX CONTACT	InterBus S	O	InterBus OPC Server
PROFIBUS	All messaging FMS / DP / FDL / S5 / S7 / MPI	Mo	PCI1500PFB/2000PFB PCU1500PFB
PROFIBUS	S7 / MPI only	Mo	PCI1500S7 PCU1500S7 PCU1000PFB
QUADLOG	APACS M-BUS	O	APACS OPC Server
ROCKWELL AUTOMATION	All Allen Bradley protocols	O	RSLinx OEM or KEPServer
ROCKWELL AUTOMATION	DF1	Mo	PCI1000/2000/4000 PCU1000
ROCKWELL AUTOMATION	DF1 / DH+ / EtherNet/IP etc.	Mb/E/S	RSLinx OEM	Native
ROCKWELL AUTOMATION	DF1 peer to peer for SLC500 Serie only	S	Native
ROCKWELL AUTOMATION	EtherNet/IP for PLC-5, SLC-500 and Logix 5000	Mo	PCU2000ETH
ROCKWELL AUTOMATION	EtherNet/IP for Logix5000 access (CompactLogix, ControlLogix,DriveLogix and FlexLogix controllers)	E	Native - Act
SAIA BURGESS CONTROLS	Ether-S-Net	E	Native
SAIA BURGESS CONTROLS	S-Net	S	Native
SAUTER	NovaNet	S	Sauter OPC Server + ActiveX TimeTable
SCHNEIDER ELECTRIC	Ethway	Mo	PCU2000ETH
SCHNEIDER ELECTRIC	Modbus ASCII /RTU Slave Time stamped Modbus	Mo	PCI1000/2000/4000 PCU1000
SCHNEIDER ELECTRIC	Modbus ASCII /RTU Slave Time stamped Modbus	O	SW1000SER
SCHNEIDER ELECTRIC	Modbus Master ASCII / RTU Time stamped Modbus	S	Native
SCHNEIDER ELECTRIC	Modbus+	Mb	Native
SCHNEIDER ELECTRIC	Open Modbus TCP/IP Master Time stamped Modbus	E	Native
SCHNEIDER ELECTRIC	Open Modbus TCP/IP Slave	E	Native
SCHNEIDER ELECTRIC	Ethway	O	Schneider OFS OPC Server (time stamped not supported)
SCHNEIDER ELECTRIC	Uni-TE TCP/IP	Mo	PCU2000ETH
SCHNEIDER ELECTRIC	Uni-TE TCP/IP	O	SW1000ETH
SCHNEIDER ELECTRIC	Uni-TE TCP/IP	O	Schneider OFS OPC Server
SCHNEIDER ELECTRIC	Unitelway Slave	S	Client Slave	Native
SCHNEIDER ELECTRIC	Unitelway Slave	Mo	PCI1000/2000/4000 PCU1000
SCHNEIDER ELECTRIC	Unitelway Slave	O	SW1000SER
SCHNEIDER ELECTRIC	Unitelway Slave	O	Schneider OFS OPC Server
SIEMENS	3964 / 3964R, RK512 messaging via CP524 / 525	S	Native
SIEMENS	All messaging Profibus FMS / DP / FDL / MPI / PPI+ / PPI	Mo	PCI1500PFB/2000PFB PCU1500PFB
SIEMENS	AS511	Mo	PCI1000/2000/4000 PCU1000
SIEMENS	AS511 for S5 serie programming port	O	SW1000SER
SIEMENS	Industrial Ethernet ISO on TCP for S5 and TI	Mo	PCU2000ETH
SIEMENS	Industrial Ethernet ISO on TCP for S5 and TI	O	SW1000ETH (H1 not supported)
SIEMENS	Industrial Ethernet ISO on TCP for S7	E	Native
SIEMENS	Industrial Ethernet TCP (Fetch / Write messaging) for S7-300 & 400	E	Native
SIEMENS	S7 / MPI	H	Netlink (NL MPI, NT 40 MPI, NT50 MPI for ISO)	Native - Act
SIEMENS	S7 PPI	E	Siemens USB/RS Multi-Master cable
SIEMENS	Sinec H1	O	Simatic Net or Matrikon
SIEMENS	TI-Direct	Mo	PCI1000/2000/4000 PCU1000
SIEMENS	TI-Direct for TI505 serie programming port	O	SW1000SER
SIEMENS Video	IP Camera with: CCIS1337-LP/CFVA-IP/CVVA-IP	O	SIEMENS MK8000 OPC Server
SIEMENS Video	SIMATRIX	O	SIEMENS MK8000 OPC Server
SIEMENS Video	SISTORE AX/CX/MX (NVS included)/MXpro/SX recorder (DVRs)	O	SIEMENS MK8000 OPC Server
SIEMENS Video	TELSCAN (Video Web Server)	O	SIEMENS MK8000 OPC Server
SIEMENS Access control	CerPass CC30 Controller (SiPass connection)	O	SIEMENS MK8000 OPC Server
SIEMENS Access control	SiPass	O	SIEMENS MK8000 OPC Server
SIEMENS Fire Detection	CC60 Gaz	O	SIEMENS MK8000 OPC Server
SIEMENS Fire Detection	CS11 AlgoRex	O	SIEMENS MK8000 OPC Server
SIEMENS Fire Detection	CS1115	O	SIEMENS MK8000 OPC Server
SIEMENS Fire Detection	CZ10	O	SIEMENS MK8000 OPC Server
SIEMENS Fire Detection	FS20 Sinteso/FS720 Cerberus PRO	O	SIEMENS MK8000 OPC Server
SIEMENS Fire Detection	STT11 CMSI	O	SIEMENS MK8000 OPC Server
SIEMENS Fire Detection	STT20 CMSI	O	SIEMENS MK8000 OPC Server
SIEMENS Fire Detection	STT2410 CMSI	O	SIEMENS MK8000 OPC Server
SIEMENS Intrusion detection	CS4	O	SIEMENS MK8000 OPC Server
SIEMENS Intrusion detection	CS440	O	SIEMENS MK8000 OPC Server
SIEMENS Intrusion detection	CS6 Guarto (NK822x configuration and connection)	O	SIEMENS MK8000 OPC Server
SIEMENS Intrusion detection	CZ12	O	SIEMENS MK8000 OPC Server
SIEMENS Intrusion detection	SI410/420	O	SIEMENS MK8000 OPC Server
SNMP	SNMP Manager V1, V2C and V3	E	Native - Act
SNMP	SNMP Agent	E	Native - Act
SOFREL	S50, S500	O	DevIO OPC Server
SOFREL	Sofbus-PC	S	CS100 Concentrator	Native
SOFREL	Sofbus-PL, Lacbus-RTU, SMS for S500,LS,Box,S50	O	Softrel OPC Server
TBOX	Semaphore LT50, LP300, CLASSIC	O	DevIO OPC Server
TREND	IQ2, IQ3	O	DevIO OPC Server
TYCO	IP POSM	E	POSM XPro Video System	Native
WAGO	Modbus ASCII / RTU	Please refer to the Schneider entry
WAGO	OPEN COM (Open Modbus)	Please refer to the Schneider entry
WAGO	Profibus FMS / DP / FDL	Please refer to the Siemens or Profibus entry
WIT	TRS II	O	PC Pilot
WIT	TRS II for WIT Force, Clip, Easy, TwinY	O	DevIO OPC Server
YOKOGAWA	Ethernet TCP/IP for FA-M serie	E	Native
YOKOGAWA	Serial protocol for FA-M serie	S	Native
YOKOGAWA	STARDOM PLC	O	DAC OPC Server

Details

Note:

Precautions for adding a new driver onto Windows Vista/7

Title	Fuji Electric Co.,Ltd. MICREX-SX Series Ethernet Driver
Version	Ver. 1.14.07
Applicable Software	GP-Pro EX Ver2.10.000 or later Pro-Server EX Ver.1.30.000 or later You can check your version by”Help”function→”Version Info”.
Related Devices	MICREX-SX Series
Related Units	Required versions depend on models. Please check 'Supported Models / Version' for the required versions of GP-Pro EX. Required driver versions for different models are listed below Model Required driver version GP3000 Series Ver. 1.10.00 or later LT3000 Series Ver. 1.12.05 or later GP4100 Series GP4104 Ver. 1.11.04 or later GP4114 Ver. 1.14.06 or later GP4000M Series Ver. 1.11.04 or later GP4000 Series Ver. 1.11.05 or later LT4000M Series Ver. 1.12.05 or later SP5000 Series Ver. 1.13.06 or later SP5000X Series Ver. 1.14.06 or later IPC Series for WinGP Ver. 1.10.00 or later General PCs for WinGP Ver. 1.10.00 or later
Device/PLC Connection Manual	For general information regarding Device connection and documentation conventions please refer to 'Device/PLC Connection Manual(link is external)'
Updated Contents	[Ver. 1.14.07] (Aug, 31, 2020) The following issues were corrected: When running an error check on a project, sometimes the outer limits of address ranges could not be detected properly.

Download Iview Communication Drivers

How to install (This is a self-extracting file.)

Please confirm that the supported software is installed in your computer. Prior to installing the driver, close all your personal computer applications, including any resident programs such as virus detection program, etc.

1. Click on the above file name to download the data to desired folder.
2. After the download to your PC is finished, double-click on the file’s icon to start the installer program.
3. After the installer starts, follow the instructions given on each screen.
4. After installation, execute GP-Pro EX.
5. Click on the Device/PLC area’s [Fuji Electric Co.,Ltd.] selection and select [MICREX-SX Series Ethernet].

When using the driver, be sure to refer to the Device Connection Manual PDF.
Also, for general information regarding Device connection and documentation conventions please refer to 'Device/PLC Connection Manual'.

In case of using a project, created with a version below than V1.10.03

Download Iview Communication Driver Software

It is necessary to reallocate a variable to a real address when using variable data.

Instructions on how to reallocate to real address.

1. Open the project file with driver V1.10.03 or later, installed in GP-Pro EX.
2. Open the “Variable List” dialog from the Individual Device Settings.
3. Delete all of the worksheet(s) (This will delete all Variable Data)
4. Delete all Structure / Array (If there are Embedded Structures / 2D Arrays then the higher level must be deleted first.)
5. Import / Re-enter Structures / Arrays
6. Import / Re-enter Variables
7. Click OK to close dialog
8. Click OK to save new Variable Data

* Please don’t close the “Variable List” dialog while doing the procedures above. If the “Variable List” dialog is closed, the allocated variables to the parts in the screen will become “-Undefined-“.

Terms of use / Cautions

Download file

Update history:

[Ver. 1.14.07] (Aug. 31, 2020)

The following issues were corrected:

• When running an error check on a project, sometimes the outer limits of address ranges could not be detected properly.

[Ver. 1.13.06]

Download Iview Communication Driver Windows 7

The following issues were corrected:

• Variable data cannot be imported normally when D300win V3.6.1.3 or later is used.

[Ver. 1.10.03] (Dec. 24, 2010)

The following issues were corrected:

• In rare cases, a variable that have been allocated to a real address, is unmatched with the Fuji Electric Co. Ltd. Micrex-SX Series D300Win software.
• In rare cases, the displayed address in the left side of the [Address] window is unfinished.
• In rare cases, putting a comment or space in the IEC file will result in an error when importing.

[Ver. 1.10.02] (Nov. 12, 2009)

The following issues were corrected:

• GP-Pro EX may be forcibly terminated when the address input dialog is opened.
• GP-Pro EX may stop responding when import is performed and variables are overwritten.

[Ver. 1.10.01](May. 8, 2008)

The following issues were corrected:

• When create structure in variable data, there is the case that display cannot communicate with PLC.